audio source 80w x2 power amplifier

80 watts RMS per channel power amplifier w/complete custom installer feature set * 80 watts RMS per channel power amplifier w/complete custom installer feature set * Bridgeable outputs for 250 watts RMS total output power * Torrodial Power Supply * 2 stereo low-level (RCA) inputs & one high-level (speaker) input, & one auxiliary low-level output * Automatic source switching w/adjustable delay timer (3-15 seconds) * Two sets of speaker outputs selectable from the front panel * Front mounted main volume & balance controls * Rear mounted master level controls for setting max output levels * Flexible Power-on: Switched, Signal Sensing, & 12v trigger * 5 way speaker wire binding posts for bare wire or Banana plugs * 80W per CH into 8 ohm loads w/less than 0.2% THD+N * 125W per CH into 4 ohm loads w/less than 0.2% THD+N * 250W Bridged Mono into 8 ohms w/less than 0.2% THD+N * Crosstalk: >65dB @ 1kHz, ref. to rated power into 8 ohms * Frequency Response: (20Hz to 20kHz)+0.0dB, -0.5dB * Signal to Noise ratio: -103dB ref. to rated power into 4 ohms * AC Power Consumption: 700W (all channels driven) * Net Weight: 24.3 lbs (11.0 kgs) * Gross Weight: 32.2 lbs (14.6.0 kgs)